Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites

Adefemi Adeodu; Ilesanmi Daniyan; Temitayo Azeez; Charles Omohimoria

doi:doi:10.11648/j.am.20150403.14

| Peer-Reviewed

Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites

Adefemi Adeodu, Ilesanmi Daniyan, Temitayo Azeez, Charles Omohimoria

Published in Advances in Materials (Volume 4, Issue 3)

Received: 8 May 2015 Accepted: 20 May 2015 Published: 1 June 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Polymer composites by and large found suitable for many specific applications in the field of electrical, electronics, marine, aerospace and microelectronics. Thus a new technique for processing polymer composites has been explored and one such is microwave curing. The roles of microwave in the post curing of polymer matrix composites cannot be under estimated, as it has the capacity to improve the mechanical properties of the composite produced. The aim of the study is to determine the effect of microwave post curing on the tensile property of aluminum reinforced and carbon black reinforced unsaturated polyester composites. This effect was compared with that post cured using conventional oven with the objective of investigating the significance of microwave curing on the tensile strength of the produced composites. A specific study comprising of aluminum filled polyester based composite and carbon black filled polyester based composite were investigated using two different composite curing methods (microwave and conventional thermal heating). The investigation, through experimentation was based on mechanical property (tensile strength) of the produced composites. Comparing the results of the post-curing of the composites using microwave and conventional methods, there is direct relationship between the tensile strength and the percentage weight fraction of the fillers with respect to the post curing methods. 30% aluminum filled, post cured in microwave has 0.01 MPa tensile strength, 20% aluminum filled (microwave) has 0.0076MPa while 30% aluminum filled (conventional oven curing) has 0.0092MPa and 20% aluminum filled (conventional oven curing) has 0.0068MPa.It was concluded that post-curing of the particulate composites through microwave is able to improve the tensile strength better as compared to thermal conventional method.

Published in	Advances in Materials (Volume 4, Issue 3)
DOI	10.11648/j.am.20150403.14
Page(s)	67-74
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Autoclave, Curing, Microwave, Polymer- Matrix Composites, Tensile Strength

References

[1]	Kwack M., Robinson P., Bismarck A., Wise R., (2011). Curing of composite materials using the recently developed Haphaistos microwave. 18th International Conference on composites materials, Korea, Aug. 21-26.
[2]	Hussein Mohammed (2012). The effect of curing time on the mechanical properties of polyester reinforced aluminum particulate composite. Nahrain University college of Engineering Journal. Vol. 15, No 2, pp 197-225.
[3]	Hertzberg R.W., (1989). Deformation and fracture mechanics of engineering material, 3rd ed., John Wiley & Sons.
[4]	Sunain Katoch, Vinay Sharma, P. P. Kundu, (2010). Swelling Kinetics of unsaturated polyester layered silicate nanocomposite depending on the fabrication Mmethod, The Open-Access Journal for the Basic Principles of Diffusion Theory, Experiment and Application, 13(1), pp 1-31.
[5]	Grayson M. and Eckroth D, Ed., (1982) “Encyclopedia of chemical technology”, 3rd ed., Vol. 18, John Wiley & Sons, p 575.
[6]	Daniel B., Miracle and Steven L. Donaldson (2001). Asm Hand Book, Volume 21, Composite, ASM International Handbook Committee.
[7]	Dominick V Rsato and Donal V Rosat., (2003). Plastics Engineering Products Design, Elsevier Ltd, The Boulevard, Langford Lane, Kidlington, Oxford OX5 lGB, UK, p 5.
[8]	Nightingale C., (2000).Microwave assisted curing of epoxy resins and composites, PhD Thesis. University of Manchester, UK.
[9]	Lee W., and Springer G., (1984). Microwave curing of composites. Journal of Composite Materials, Vol.18, No.4, pp 387-409.
[10]	J. Wei, Y. Chang, B. Thomas and M. Hawley, “Microwave Heating of Thick-Section Graphite Fiber/Epoxy Composites”. Proceedings of ICCM-8, Vol.1, pp10-L-1 to 10-L-10, 1991.
[11]	Boey.F., and Lee T., (1991). Electromagnetic Radiation Curing of an Epoxy/Fibre Glass Reinforced Composite. Radiation Physics and Chemistry, Vol.38, No.4, pp 419 - 442.
[12]	Yue C., and Boey F., (1993). The Effect of Microwave and Thermal Curing on the Interfacial Properties of an Epoxy/Glass Composite. 2nd International Conference on the Deformation and Fracture of Composites. pp. 12.1-12.8.
[13]	M. Akay and S. Kong Ah Mun, (1995). Bearing strength of autoclave and oven cured Kevlar/epoxy laminates under static and dynamic loading. Composites Vol. 26, pp.451-456, (Receive August 1994; revised 7 October 1994).
[14]	Jian Zhou, Chun Shi, Bingchu Mei, Runzhang Yuan, Zhengyi Fu, (2003). Research on the technology and the mechanical properties of the microwave processing of polymer, Journal of Materials Processing Technology. Vol.137, pp.156-158.
[15]	Bambang Soesatyo, Aaron Blicblau, Elias Siores, (1999). Effect of rapid curing doped epoxy adhesive between two polycarbonate substrates on the bond tensile strength. Journal of Materials Processing Technology. Vol. 89–90, pp.451-456.
[16]	Bai S. L., Djafari V., Andreani M. and Francois D. (1995). A comparative study of the mechanical behaviour of an epoxy resin cured by Microwaves with one cured thermally”, European Polymer Journal. Vol. 31(9), pp.875-884. (Received 17 January 1994; accepted in final form 27 June 1994).
[17]	Bai S. L. and Djafar V. (1995). Interfacial properties of microwave cured Composites”, Composites, 26, pp.645-651.
[18]	Chaowasakoo T., Sombatsompop N. (2007). Mechanical and morphological properties of fly ash/epoxy composites using conventional thermal and microwave curing methods. Composites Science and Technology. Vol. 67, pp.2282-2291.
[19]	National Research Centre (NRC) (1994), Microwave Processing of Materials, National Materials Advisory Board, Commission on Engineering and Technical Systems, National Academy Press, USA, pp.1-7, 11-2, 100, 105.
[20]	Prato (2008). Using the Selective Functionalization of Metallic Single-Walled Carbon Nanotubes to Control Dielectrophoretic Mobility. J. Am. Chem. Soc., 130 (25).
[21]	Hossain M. R., Hossain M. F., Islam M. A., (2014). Effect of wood properties on the behaviors of wood particle reinforced polymer matrix composites. J. Sci. Res 6(3) Page 431-443.
[22]	Azuke F., Aigbodion V. S., Abdulwahab M., Fayomi O. S.I., Popoola A. P.I., Nwoyi C. I., Garba B, (2012). Effect of bone particle on the properties and microstructure of polypropylene-bone ash particulate composites. Results in Physics 2 Page 135-141
[23]	[23] Chawla Nikhilesh and Yu Linshen (2001). Mechanical behavior of particle reinforced metal matrix composites. Advanced Engineering Material Vol. 6, page 1438-1656
[24]	[24] Shao-Yunfu, Xi-Qiao Feng, Bernd Lauke, Yiu-wing Mail (2008). Effect of particle size particle-matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites. Science Direct. Composites: part B, 39 Page 933-961.
[25]	Hassan S. B., Oghenevweta E. J., Aigbodion V. S (2012). Potential of maize stalk ash as reinforcement in polyester composites. Journal of Minerals Materials Characterization and Engineering. Vol. 11, No 4, Page 445-459.

Cite This Article

Plain Text BibTeX RIS

APA Style

Adefemi Adeodu, Ilesanmi Daniyan, Temitayo Azeez, Charles Omohimoria. (2015). Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites. Advances in Materials, 4(3), 67-74. https://doi.org/10.11648/j.am.20150403.14

Copy | Download

ACS Style

Adefemi Adeodu; Ilesanmi Daniyan; Temitayo Azeez; Charles Omohimoria. Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites. Adv. Mater. 2015, 4(3), 67-74. doi: 10.11648/j.am.20150403.14

Copy | Download

AMA Style

Adefemi Adeodu, Ilesanmi Daniyan, Temitayo Azeez, Charles Omohimoria. Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites. Adv Mater. 2015;4(3):67-74. doi: 10.11648/j.am.20150403.14

Copy | Download

@article{10.11648/j.am.20150403.14,
  author = {Adefemi Adeodu and Ilesanmi Daniyan and Temitayo Azeez and Charles Omohimoria},
  title = {Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites},
  journal = {Advances in Materials},
  volume = {4},
  number = {3},
  pages = {67-74},
  doi = {10.11648/j.am.20150403.14},
  url = {https://doi.org/10.11648/j.am.20150403.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20150403.14},
  abstract = {Polymer composites by and large found suitable for many specific applications in the field of electrical, electronics, marine, aerospace and microelectronics. Thus a new technique for processing polymer composites has been explored and one such is microwave curing. The roles of microwave in the post curing of polymer matrix composites cannot be under estimated, as it has the capacity to improve the mechanical properties of the composite produced. The aim of the study is to determine the effect of microwave post curing on the tensile property of aluminum reinforced and carbon black reinforced unsaturated polyester composites. This effect was compared with that post cured using conventional oven with the objective of investigating the significance of microwave curing on the tensile strength of the produced composites. A specific study comprising of aluminum filled polyester based composite and carbon black filled polyester based composite were investigated using two different composite curing methods (microwave and conventional thermal heating). The investigation, through experimentation was based on mechanical property (tensile strength) of the produced composites. Comparing the results of the post-curing of the composites using microwave and conventional methods, there is direct relationship between the tensile strength and the percentage weight fraction of the fillers with respect to the post curing methods. 30% aluminum filled, post cured in microwave has 0.01 MPa tensile strength, 20% aluminum filled (microwave) has 0.0076MPa while 30% aluminum filled (conventional oven curing) has 0.0092MPa and 20% aluminum filled (conventional oven curing) has 0.0068MPa.It was concluded that post-curing of the particulate composites through microwave is able to improve the tensile strength better as compared to thermal conventional method.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites
AU  - Adefemi Adeodu
AU  - Ilesanmi Daniyan
AU  - Temitayo Azeez
AU  - Charles Omohimoria
Y1  - 2015/06/01
PY  - 2015
N1  - https://doi.org/10.11648/j.am.20150403.14
DO  - 10.11648/j.am.20150403.14
T2  - Advances in Materials
JF  - Advances in Materials
JO  - Advances in Materials
SP  - 67
EP  - 74
PB  - Science Publishing Group
SN  - 2327-252X
UR  - https://doi.org/10.11648/j.am.20150403.14
AB  - Polymer composites by and large found suitable for many specific applications in the field of electrical, electronics, marine, aerospace and microelectronics. Thus a new technique for processing polymer composites has been explored and one such is microwave curing. The roles of microwave in the post curing of polymer matrix composites cannot be under estimated, as it has the capacity to improve the mechanical properties of the composite produced. The aim of the study is to determine the effect of microwave post curing on the tensile property of aluminum reinforced and carbon black reinforced unsaturated polyester composites. This effect was compared with that post cured using conventional oven with the objective of investigating the significance of microwave curing on the tensile strength of the produced composites. A specific study comprising of aluminum filled polyester based composite and carbon black filled polyester based composite were investigated using two different composite curing methods (microwave and conventional thermal heating). The investigation, through experimentation was based on mechanical property (tensile strength) of the produced composites. Comparing the results of the post-curing of the composites using microwave and conventional methods, there is direct relationship between the tensile strength and the percentage weight fraction of the fillers with respect to the post curing methods. 30% aluminum filled, post cured in microwave has 0.01 MPa tensile strength, 20% aluminum filled (microwave) has 0.0076MPa while 30% aluminum filled (conventional oven curing) has 0.0092MPa and 20% aluminum filled (conventional oven curing) has 0.0068MPa.It was concluded that post-curing of the particulate composites through microwave is able to improve the tensile strength better as compared to thermal conventional method.
VL  - 4
IS  - 3
ER  -

Copy | Download

Author Information

Adefemi Adeodu

Department of Mechanical and Mechatronics Engineering, Afe Babalola University, Ado Ekiti, Nigeria
Ilesanmi Daniyan

Department of Mechanical and Mechatronics Engineering, Afe Babalola University, Ado Ekiti, Nigeria
Temitayo Azeez

Department of Mechanical and Mechatronics Engineering, Afe Babalola University, Ado Ekiti, Nigeria
Charles Omohimoria

Department of Petroleum and Chemical Engineering, Afe Babalola University, Ado Ekiti, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Adefemi Adeodu, Ilesanmi Daniyan, Temitayo Azeez, Charles Omohimoria. (2015). Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites. Advances in Materials, 4(3), 67-74. https://doi.org/10.11648/j.am.20150403.14

Copy | Download

ACS Style

Adefemi Adeodu; Ilesanmi Daniyan; Temitayo Azeez; Charles Omohimoria. Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites. Adv. Mater. 2015, 4(3), 67-74. doi: 10.11648/j.am.20150403.14

Copy | Download

AMA Style

Adefemi Adeodu, Ilesanmi Daniyan, Temitayo Azeez, Charles Omohimoria. Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites. Adv Mater. 2015;4(3):67-74. doi: 10.11648/j.am.20150403.14

Copy | Download

@article{10.11648/j.am.20150403.14,
  author = {Adefemi Adeodu and Ilesanmi Daniyan and Temitayo Azeez and Charles Omohimoria},
  title = {Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites},
  journal = {Advances in Materials},
  volume = {4},
  number = {3},
  pages = {67-74},
  doi = {10.11648/j.am.20150403.14},
  url = {https://doi.org/10.11648/j.am.20150403.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20150403.14},
  abstract = {Polymer composites by and large found suitable for many specific applications in the field of electrical, electronics, marine, aerospace and microelectronics. Thus a new technique for processing polymer composites has been explored and one such is microwave curing. The roles of microwave in the post curing of polymer matrix composites cannot be under estimated, as it has the capacity to improve the mechanical properties of the composite produced. The aim of the study is to determine the effect of microwave post curing on the tensile property of aluminum reinforced and carbon black reinforced unsaturated polyester composites. This effect was compared with that post cured using conventional oven with the objective of investigating the significance of microwave curing on the tensile strength of the produced composites. A specific study comprising of aluminum filled polyester based composite and carbon black filled polyester based composite were investigated using two different composite curing methods (microwave and conventional thermal heating). The investigation, through experimentation was based on mechanical property (tensile strength) of the produced composites. Comparing the results of the post-curing of the composites using microwave and conventional methods, there is direct relationship between the tensile strength and the percentage weight fraction of the fillers with respect to the post curing methods. 30% aluminum filled, post cured in microwave has 0.01 MPa tensile strength, 20% aluminum filled (microwave) has 0.0076MPa while 30% aluminum filled (conventional oven curing) has 0.0092MPa and 20% aluminum filled (conventional oven curing) has 0.0068MPa.It was concluded that post-curing of the particulate composites through microwave is able to improve the tensile strength better as compared to thermal conventional method.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Effect of Microwave Curing on the Tensile Property of Particulate Reinforced Polymer Matrix Composites
AU  - Adefemi Adeodu
AU  - Ilesanmi Daniyan
AU  - Temitayo Azeez
AU  - Charles Omohimoria
Y1  - 2015/06/01
PY  - 2015
N1  - https://doi.org/10.11648/j.am.20150403.14
DO  - 10.11648/j.am.20150403.14
T2  - Advances in Materials
JF  - Advances in Materials
JO  - Advances in Materials
SP  - 67
EP  - 74
PB  - Science Publishing Group
SN  - 2327-252X
UR  - https://doi.org/10.11648/j.am.20150403.14
AB  - Polymer composites by and large found suitable for many specific applications in the field of electrical, electronics, marine, aerospace and microelectronics. Thus a new technique for processing polymer composites has been explored and one such is microwave curing. The roles of microwave in the post curing of polymer matrix composites cannot be under estimated, as it has the capacity to improve the mechanical properties of the composite produced. The aim of the study is to determine the effect of microwave post curing on the tensile property of aluminum reinforced and carbon black reinforced unsaturated polyester composites. This effect was compared with that post cured using conventional oven with the objective of investigating the significance of microwave curing on the tensile strength of the produced composites. A specific study comprising of aluminum filled polyester based composite and carbon black filled polyester based composite were investigated using two different composite curing methods (microwave and conventional thermal heating). The investigation, through experimentation was based on mechanical property (tensile strength) of the produced composites. Comparing the results of the post-curing of the composites using microwave and conventional methods, there is direct relationship between the tensile strength and the percentage weight fraction of the fillers with respect to the post curing methods. 30% aluminum filled, post cured in microwave has 0.01 MPa tensile strength, 20% aluminum filled (microwave) has 0.0076MPa while 30% aluminum filled (conventional oven curing) has 0.0092MPa and 20% aluminum filled (conventional oven curing) has 0.0068MPa.It was concluded that post-curing of the particulate composites through microwave is able to improve the tensile strength better as compared to thermal conventional method.
VL  - 4
IS  - 3
ER  -

Copy | Download