Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints

Mesut Eren; Rıza Aydemir; Hakan Aşkun; Ali Eren Özbey; Murat Orbay

doi:doi:10.11648/j.am.20140303.12

| Peer-Reviewed

Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints

Mesut Eren, Rıza Aydemir, Hakan Aşkun, Ali Eren Özbey, Murat Orbay

Published in Advances in Materials (Volume 3, Issue 3)

Received: 22 August 2014 Accepted: 3 September 2014 Published: 20 September 2014

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Bitumen paints have lost their importance but are still used for large area applications such as tanks and pipelines. It was determined that improving solvent based paint properties by physical or chemical modification by polymers was possible. Applying this approach for water based paints has shown that advance in properties such as hardness and drying times without loss in adhesion and flexibility can be obtained by blending of various polymeric emulsions with bitumen emulsions used for waterproofing membranes. Changes in morphology of the films occurred after blending, indicating interaction between bitumen maltene fractions and polymers. Physical modifications with styrene acrylic emulsions were more rewarding than elastomeric or chemically modifying crosslinking emulsions.

Published in	Advances in Materials (Volume 3, Issue 3)
DOI	10.11648/j.am.20140303.12
Page(s)	16-21
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Bitumen Paints, Water Based, Chemical Modifications, Physical Modifications

References

[1]	D. Lesueur, Adv. Colloid Interface Sci. 145, (2009) 42–82.
[2]	Y. Yildirim, Construct. Build. Mater. 21, (2007) 66-72.
[3]	A.P. Kuriakose, S. Kochu Baby Manjooran, Surf. Coat. Technol.145, (2001) 132-138.
[4]	R. Aydemir, M. Eren, H. Aşkun, A. E. Özbey, M. Orbay, Prog. Org. Coat. 76, (2013) 966-971

Cite This Article

Plain Text BibTeX RIS

APA Style

Mesut Eren, Rıza Aydemir, Hakan Aşkun, Ali Eren Özbey, Murat Orbay. (2014). Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints. Advances in Materials, 3(3), 16-21. https://doi.org/10.11648/j.am.20140303.12

Copy | Download

ACS Style

Mesut Eren; Rıza Aydemir; Hakan Aşkun; Ali Eren Özbey; Murat Orbay. Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints. Adv. Mater. 2014, 3(3), 16-21. doi: 10.11648/j.am.20140303.12

Copy | Download

AMA Style

Mesut Eren, Rıza Aydemir, Hakan Aşkun, Ali Eren Özbey, Murat Orbay. Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints. Adv Mater. 2014;3(3):16-21. doi: 10.11648/j.am.20140303.12

Copy | Download

@article{10.11648/j.am.20140303.12,
  author = {Mesut Eren and Rıza Aydemir and Hakan Aşkun and Ali Eren Özbey and Murat Orbay},
  title = {Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints},
  journal = {Advances in Materials},
  volume = {3},
  number = {3},
  pages = {16-21},
  doi = {10.11648/j.am.20140303.12},
  url = {https://doi.org/10.11648/j.am.20140303.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20140303.12},
  abstract = {Bitumen paints have lost their importance but are still used for large area applications such as tanks and pipelines. It was determined that improving solvent based paint properties by physical or chemical modification by polymers was possible. Applying this approach for water based paints has shown that advance in properties such as hardness and drying times without loss in adhesion and flexibility can be obtained by blending of various polymeric emulsions with bitumen emulsions used for waterproofing membranes. Changes in morphology of the films occurred after blending, indicating interaction between bitumen maltene fractions and polymers. Physical modifications with styrene acrylic emulsions were more rewarding than elastomeric or chemically modifying crosslinking emulsions.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints
AU  - Mesut Eren
AU  - Rıza Aydemir
AU  - Hakan Aşkun
AU  - Ali Eren Özbey
AU  - Murat Orbay
Y1  - 2014/09/20
PY  - 2014
N1  - https://doi.org/10.11648/j.am.20140303.12
DO  - 10.11648/j.am.20140303.12
T2  - Advances in Materials
JF  - Advances in Materials
JO  - Advances in Materials
SP  - 16
EP  - 21
PB  - Science Publishing Group
SN  - 2327-252X
UR  - https://doi.org/10.11648/j.am.20140303.12
AB  - Bitumen paints have lost their importance but are still used for large area applications such as tanks and pipelines. It was determined that improving solvent based paint properties by physical or chemical modification by polymers was possible. Applying this approach for water based paints has shown that advance in properties such as hardness and drying times without loss in adhesion and flexibility can be obtained by blending of various polymeric emulsions with bitumen emulsions used for waterproofing membranes. Changes in morphology of the films occurred after blending, indicating interaction between bitumen maltene fractions and polymers. Physical modifications with styrene acrylic emulsions were more rewarding than elastomeric or chemically modifying crosslinking emulsions.
VL  - 3
IS  - 3
ER  -

Copy | Download

Author Information

Mesut Eren

Betek Boya ve Kimya San. A.?., ?stanbul, Turkey
Rıza Aydemir
Hakan Aşkun
Ali Eren Özbey
Murat Orbay

Betek Boya ve Kimya San. A.?., ?stanbul, Turkey； Istanbul University, Fac. of Engineering (Ret.) ?stanbul, Turkey

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Mesut Eren, Rıza Aydemir, Hakan Aşkun, Ali Eren Özbey, Murat Orbay. (2014). Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints. Advances in Materials, 3(3), 16-21. https://doi.org/10.11648/j.am.20140303.12

Copy | Download

ACS Style

Mesut Eren; Rıza Aydemir; Hakan Aşkun; Ali Eren Özbey; Murat Orbay. Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints. Adv. Mater. 2014, 3(3), 16-21. doi: 10.11648/j.am.20140303.12

Copy | Download

AMA Style

Mesut Eren, Rıza Aydemir, Hakan Aşkun, Ali Eren Özbey, Murat Orbay. Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints. Adv Mater. 2014;3(3):16-21. doi: 10.11648/j.am.20140303.12

Copy | Download

@article{10.11648/j.am.20140303.12,
  author = {Mesut Eren and Rıza Aydemir and Hakan Aşkun and Ali Eren Özbey and Murat Orbay},
  title = {Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints},
  journal = {Advances in Materials},
  volume = {3},
  number = {3},
  pages = {16-21},
  doi = {10.11648/j.am.20140303.12},
  url = {https://doi.org/10.11648/j.am.20140303.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20140303.12},
  abstract = {Bitumen paints have lost their importance but are still used for large area applications such as tanks and pipelines. It was determined that improving solvent based paint properties by physical or chemical modification by polymers was possible. Applying this approach for water based paints has shown that advance in properties such as hardness and drying times without loss in adhesion and flexibility can be obtained by blending of various polymeric emulsions with bitumen emulsions used for waterproofing membranes. Changes in morphology of the films occurred after blending, indicating interaction between bitumen maltene fractions and polymers. Physical modifications with styrene acrylic emulsions were more rewarding than elastomeric or chemically modifying crosslinking emulsions.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints
AU  - Mesut Eren
AU  - Rıza Aydemir
AU  - Hakan Aşkun
AU  - Ali Eren Özbey
AU  - Murat Orbay
Y1  - 2014/09/20
PY  - 2014
N1  - https://doi.org/10.11648/j.am.20140303.12
DO  - 10.11648/j.am.20140303.12
T2  - Advances in Materials
JF  - Advances in Materials
JO  - Advances in Materials
SP  - 16
EP  - 21
PB  - Science Publishing Group
SN  - 2327-252X
UR  - https://doi.org/10.11648/j.am.20140303.12
AB  - Bitumen paints have lost their importance but are still used for large area applications such as tanks and pipelines. It was determined that improving solvent based paint properties by physical or chemical modification by polymers was possible. Applying this approach for water based paints has shown that advance in properties such as hardness and drying times without loss in adhesion and flexibility can be obtained by blending of various polymeric emulsions with bitumen emulsions used for waterproofing membranes. Changes in morphology of the films occurred after blending, indicating interaction between bitumen maltene fractions and polymers. Physical modifications with styrene acrylic emulsions were more rewarding than elastomeric or chemically modifying crosslinking emulsions.
VL  - 3
IS  - 3
ER  -

Copy | Download